Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FLEX NORYL™ Resin WCD801A - Asia - (PPE+TPE) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Flex Noryl datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Recommandations pour la transformation Moulage par injection - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

FLEX NORYL™ WCD801A resin is a flexible, non-reinforced, migration improved, extrudable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and performance capable of meeting UL VW-1 requirements, 80C end use temperature rating, and heat deformation performance as defined by UL 1581. FLEX NORYL WCD801A resin is intended for evaluation in wire insulation and cable jacket applications in dark colors. It has a Shore A Hardness reading of 80 and exhibits superior thermal stability, very low water absorption, good electric properties, and low specific gravity. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.

UL Yellow Card Link E207780-536311

Caractéristiques des transformations/physiques	Valeur	Unité	Norme du test
ISO Data
Conductivité thermique du fondu	0.2	W/(m K)	-
Chaleur spécifique du fondu	2050	J/(kg K)	-
Température d'éjection	68	°C	-
ASTM Data
Indice de fluidité, MFI	11	g/10min	ASTM D 1238
Température	250	°C	-
Charge	5	kg	-

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Contrainte à la rupture	13	MPa	ISO 527
Déformation à la rupture	50	%	ISO 527
ASTM Data
Résistance de traction à la rupture	12	MPa	ASTM D 638
Allongement à la rupture	120	%	ASTM D 638
Dureté A Shore	80	-	ASTM D 2240

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Coeffic. de dilatation therm. linéique, parallèle	87.4	E-6/K	ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend.	175	E-6/K	ISO 11359-1/-2
Inflammabilité pr. épaisseur h	V-0	class	IEC 60695-11-10
Epaisseur de l'éprouvette	4.0	mm	-
Glow Wire Ignition Temperature (GWIT)	750	°C	IEC 60695-2-13
GWIT - thickness tested (3)	3	mm	-

Propriétés électriques	Valeur	Unité	Norme du test
ISO Data
Permittivité relative, 1MHz	2.8	-	IEC 62631-2-1
Facteur de pertes, 1MHz	40	E-4	IEC 62631-2-1
Résistivité transversale	>1E13	Ohm*m	IEC 62631-3-1
Indice de résistance au cheminement	600	-	IEC 60112

Propriétés diverses	Valeur	Unité	Norme du test
Densité	1100	kg/m³	ASTM D 792

Recommandations pour la transformation Moulage par injection	Valeur	Unité	Norme du test
Vitesse de rotation de vis	15 - 85	rpm	-

Fonctions

Caractéristiques

Additifs

Agent ignifugeant

Propriétés spéciales

Ignifugé

Disponibilité régionale

Asia Pacific

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.